MM slash DD slash YYYY
(Location, site name or call letters)
If your site is located in the USA, please enter its FCC ASR.
Please provide the total height of the structure (in feet), including all appurtenances.
Please provide the AGL of the main guyed structure (top of steel) in feet.
Please provide the height of any appurtenances on the tower (antenna, lighting apparatus, etc.) in feet.
Bridge length is the distance between the mounting location of the controller and the tower itself (info used to determine correct conduit length).
Please upload any files that may assist us in developing an accurate quote. Examples include:
- List of active antennas with frequency, power and elevation
- Tower mapping report or tower drawing
- Structural analysis or tower drawing with tower legs
Accepted file types: jpg, png, pdf, Max. file size: 100 MB.
Drop files here or
Flash requires a 30 working days in order to manufacture and test the equipment. Flash Field Services
can facilitate your tower lighting installation. Please let your sales rep know if you'd like an installation estimate.
MM slash DD slash YYYY
Please let us know if there are special circumstances or any other information we should know.
ICAO high intesity type A/medium intensity types B or C
* Structures requiring 4 or more beacons per tier will require customization.
ICAO medium intensity type C or low intensity type B
* Structures requiring 2 or 4 markers per tier will require customization.
FAA L-964 and/or L/865
ICAO medium intensity types A or B
* Structures requiring 2 or more AOL beacons will require customization.
*3/4" NPT is the standard port hole size. Other sizes will require customization.
208 VAC with or without markers. 277 VAC without markers only.
*75' cable length is standard.
The FTS 270 comes factory equipped with GPS functionality.
*A 50' cable length is standard. Make a selection if a longer cable is required. Systems requiring more than 50' will require customization.
This is the separation distance between the power supply and the separately mounted LED panels.
Please select Flash NOC if you would like a quote for Flash monitoring services.
An optional Wi-Fi antenna allows secured local access to the lighting system’s web page. Remote access of the web page is available through the Ethernet port if connected to a REMOTE NOC.
For sites that will be monitored via dry contacts. Each relay board gives 14 extra dry contact outputs for remote monitoring of alarms.
*Sites requiring 2 expansion boards will require customization.
TIER 1 is the lowest level of lights on the structure and counts up to a maximum height of TIER 6.
To ensure you are provided properly sized mounting hardware, please indicate the outer diameter for tower legs on this and subsequent questions.
If you are unsure of the size and would like all sizing options included in your kit, please select "all".
This field is for validation purposes and should be left unchanged.